Zsh Mailing List Archive
Messages sorted by:
Reverse Date,
Date,
Thread,
Author
completion for ipset
- X-seq: zsh-users 12985
- From: Tomasz Pala <gotar@xxxxxxxxxx>
- To: zsh-users@xxxxxxxxxx
- Subject: completion for ipset
- Date: Mon, 23 Jun 2008 19:09:35 +0200
- In-reply-to: <20080529123042.GA24187@xxxxxxxxxxxxxxxx>
- Mailing-list: contact zsh-users-help@xxxxxxxxxx; run by ezmlm
- References: <20080529123042.GA24187@xxxxxxxxxxxxxxxx>
Hello,
attached file completes ipset command. I believe it should go into
Completion/Linux.
--
Tomasz Pala <gotar@xxxxxxxxxxxxx>
#compdef ipset
local offset=0
local -a args from_to hash cmds listopts
_set_types () {
_values -S \ "Set type" \
'ipmap[Up to 65536 IP addresses]' \
'macipmap[Up to 65536 IP addresses with MAC]' \
'portmap[Up to 65536 ports]' \
'iphash[Hash of IP addresses]' \
'nethash[Hash of network addresses]' \
'ipporthash[Hash of IP address and port pairs]' \
'iptree[Tree of IP addresses, optionally with timeout]'
}
if [[ $words[2] = (-q|--quiet) ]]; then
offset=1
fi
_ipsets () {
local -a vals
vals=( ${${(M)${(f)"$(_call_program ipsets ipset -nL)"}%Name: *}#Name: } )
_describe -t ipsets "IP sets" vals
}
_sets () {
_ipsets
local -a vals
case $words[offset+2]; in
-X|--destroy)
vals=('\:all\::remove all not referenced sets')
;;
-F|--flush)
vals=('\:all\::flush all sets')
;;
-L|--list|-nL|-sL|-nsL|-snL|-n|-s|-ns|-sn)
vals=('\:all\::list all sets')
;;
-S|--save)
vals=('\:all\::save all sets')
esac
_describe -t special_values "special values" vals
}
from_to=('(--network)--from[from IP or network (with --netmask)]:IP'
'(--network)--to[to IP or network (with --netmask)]:IP'
'(--from --to)--network[network]:IP/mask'
)
hash=( '--hashsize[The initial hash size (default 1024)]:hash size'
'--probes[Max number of tries to resolve clashing (default 8)]:probes'
'--resize[Ratio of increasing hash size after unsuccessful <probes> number of double-hashing]:percent'
)
case $words[offset+2]; in
-N|--create)
case $words[offset+4]; in
ipmap)
args=( $from_to
'--netmask[store network addresses instead of IP addresses]:CIDR'
)
;;
macipmap)
args=( $from_to
'--matchunset[Always match IP addresses which could be stored in the set but are not]'
)
;;
portmap)
args=( '--from[from port]:port:_ports'
'--to[to port]:port:_ports'
)
;;
iphash)
args=( $hash
'--netmask[store network addresses instead of IP addresses]:CIDR'
)
;;
nethash)
args=( $hash )
;;
ipporthash)
args=( $from_to $hash )
;;
iptree)
args=( '--timeout[Timeout value for the entries in seconds (default 0)]:timeout' )
;;
esac
;;
-T|--test)
args=( '(-b --binding)'{-b,--binding}'[Test wether '$words[offset+4]' points to the specified binding]:::_ipsets' )
;;
-B|--bind)
args=( '(-b --binding)'{-b,--binding}'[Value of the binding]:::_ipsets' )
;;
esac
_ips () {
if [[ $CURRENT -eq ((offset+4)) ]]; then
local ips=1 default
local -a vals vals1 vals2 bindings
vals=( ${${${(f)"$(_call_program ipsets ipset -nL $words[offset+3])"}[4,-1]}//\:/\\:} )
for i in $vals; do
if [[ $i = Default\ binding\\:* ]]; then default=${i#Default binding\\: }; continue; fi
if [[ $i = (Header\\:*|Members\\:) ]]; then continue; fi
if [[ $i = 'Bindings\:' ]]; then ips=0; continue; fi
if (( $ips )); then vals1+=$i; else bindings+=${i/ ->/:}; fi
done
case $words[offset+2]; in
-T|--test)
vals2=('\:default\::test default binding of the set for --binding')
;;
-B|--binding)
vals2=('\:default\::set default binding of the set')
;;
-U|--unbind)
vals1=()
vals2=('\:all\::destroy the bindings of all elements of a set')
if [[ -n "$default" ]]; then
vals2+=("\:default\::remove default binding of the set to '$default'")
fi
_describe -t ipb "IPs from $words[offset+3] set with bindings" bindings
;;
esac
_describe -t ips "IPs from $words[offset+3] set" vals1
_describe -t special_values "special values" vals2
fi
}
cmds=(-N -X -F -E -W -S -R -A -D -T -B -U -H --create --destroy --flush --rename --swap --save --restore --add --del --test --bind --unbind --help)
listopts=(-n --numeric -s --sorted -L --list -nL -sL -nsL -snL -ns -sn)
_arguments \
"($cmds $listopts)"{-N,--create}'[Create a set]:set name::::_set_types' \
"($cmds $listopts)"{-X,--destroy}'[Destroy specified set (or all if none specified)]:set name:_sets' \
"($cmds $listopts)"{-F,--flush}'[Flush specified set (or all if none specified)]:set name:_sets' \
"($cmds $listopts)"{-E,--rename}'[rename set]:current set name:_ipsets:new set name:' \
"($cmds $listopts)"{-W,--swap}'[swap two sets]:::_ipsets:::_ipsets' \
"($cmds -L --list -q --quiet -nL -sL -nsL -snL)"{-L,--list}'[List the entries and bindings for the specified set (or all if none specified)]:::_sets' \
"($cmds -L --list -q --quiet -n --numeric -snL -nsL -sL -ns -sn)"-nL'[List the entries and bindings for the specified set (or all if none specified) \- numeric output]:::_sets' \
"($cmds -L --list -q --quiet -s --sorted -snL -nsL -nL -ns -sn)"-sL'[List the entries and bindings for the specified set (or all if none specified) \- sorted output]:::_sets' \
"($cmds $listopts -q --quiet)"{-nsL,-snL}'[List the entries and bindings for the specified set (or all if none specified) \- sorted numeric output]:::_sets' \
"($cmds $listopts)"{-S,--save}'[Save the given set (or all if none specified)]:::_sets' \
"($cmds $listopts)"{-R,--restore}'[Restore a saved session generated by --save from stdin]' \
"($cmds $listopts)"{-A,--add}'[Add an IP to a set]:::_ipsets:IP' \
"($cmds $listopts)"{-D,--del}'[Delete an IP from a set]:::_ipsets:::_ips' \
"($cmds $listopts)"{-T,--test}'[Test wether an IP is in a set or the IP points to the specified binding]:::_ipsets:::_ips' \
"($cmds $listopts)"{-B,--bind}'[Bind the IP in setname to to-setname]:::_ipsets:::_ips' \
"($cmds $listopts)"{-U,--unbind}'[Delete the binding belonging to IP in set setname]:::_ipsets:::_ips' \
"($cmds $listopts)"{-H,--help}'[Print help and settype specific help if settype specified]:::_set_types' \
"(-q --quiet $listopts)"{-q,--quiet}'[Suppress any output to stdout and stderr]' \
"($cmds -s --sorted -q --quiet -sL -nsL -snL -ns -sn)"{-s,--sorted}'[Sorted output]' \
"($cmds -n --numeric -q --quiet -nL -nsL -snL -ns -sn)"{-n,--numeric}"[Numeric output; don't resolve host names, network names and services]" \
"($cmds -ns -sn -q --quiet -nL -sL -nsL -snL -n --numeric -s --sorted)"{-ns,-sn}'[Sorted numeric output]' \
"$args[@]"
Messages sorted by:
Reverse Date,
Date,
Thread,
Author