Zsh Mailing List Archive
Messages sorted by:
Reverse Date,
Date,
Thread,
Author
Re: PATCH: _hosts, _hostports, _telnet and _socket
- X-seq: zsh-workers 7934
- From: "Bart Schaefer" <schaefer@xxxxxxxxxxxxxxxxxxxxxxx>
- To: <zsh-workers@xxxxxxxxxxxxxx>
- Subject: Re: PATCH: _hosts, _hostports, _telnet and _socket
- Date: Sun, 19 Sep 1999 00:49:29 +0000
- In-reply-to: <rsqaeqm73t4.fsf@xxxxxxxxxxxxxxxxx>
- Mailing-list: contact zsh-workers-help@xxxxxxxxxxxxxx; run by ezmlm
- References: <000001befd11$ba0b0bb0$21c9ca95@xxxxxxxxxxxxxx> <rsqvh9g8gf2.fsf@xxxxxxxxxxxxxxxxx> <rsqaeqm73t4.fsf@xxxxxxxxxxxxxxxxx>
On Sep 17, 9:57am, Tanaka Akira wrote:
} Subject: Re: PATCH: _hosts, _hostports, _telnet and _socket
}
} In article <rsqvh9g8gf2.fsf@xxxxxxxxxxxxxxxxx>,
} Tanaka Akira <akr@xxxxxxxxxxx> writes:
}
} > I agree that `telnet' has many variants and `_telnet' should complete
} > only valid options of `telnet' if it is possible.
}
} Following patch tries this.
A minor improvement ...
Index: Completion/User/_telnet
===================================================================
@@ -9,55 +9,47 @@
typeset -A options
if (( ! $+_telnet_short )); then
- local help="$(telnet -\? < /dev/null 2>&1)"
+ local k help="$(telnet -\? < /dev/null 2>&1)"
+ local -A optionmap
+ optionmap=( "[-8]" '-8[allow 8-Bit data]' \
+ "[-E]" '-E[disable an escape character]' \
+ "[-K]" '-K[no automatic login]' \
+ "[-L]" '-L[allow 8-Bit data on output]' \
+ "[-N]" '-N[supress reverse lookup]' \
+ "[-S tos]" '-S+:IP type-of-service:' \
+ "[-X atype]" '-X+:authentication type to disable:' \
+ "[-a]" '-a[attempt automatic login]' \
+ "[-c]" '-c[disable .telnetrc]' \
+ "[-d]" '-d[debug mode]' \
+ "[-e char]" '-e+[specify escape character]:escape character:' \
+ "[-f/" '-f' \
+ "/-F]" '-F' \
+ "[-k realm]" '-k+:realm:' \
+ "[-l user]" '-l+[specify user]:user:->users' \
+ "[-n tracefile]" '-n+[specify tracefile]:tracefile:_files' \
+ "[-r]" '-r[rlogin like user interface]' \
+ "[-s src_addr]" '-s+[set source IP address]:src_addr:' \
+ "[-x]" '-x' \
+ "[-t transcom]" '-t+:transcom:' )
+
_telnet_short=()
- [[ "$help" = *"[-8]"* ]] &&
- _telnet_short=("$_telnet_short[@]" '-8[allow 8-Bit data]')
- [[ "$help" = *"[-E]"* ]] &&
- _telnet_short=("$_telnet_short[@]" '-E[disable an escape character]')
- [[ "$help" = *"[-K]"* ]] &&
- _telnet_short=("$_telnet_short[@]" '-K[no automatic login]')
- [[ "$help" = *"[-L]"* ]] &&
- _telnet_short=("$_telnet_short[@]" '-L[allow 8-Bit data on output]')
- [[ "$help" = *"[-N]"* ]] &&
- _telnet_short=("$_telnet_short[@]" '-N[supress reverse lookup]')
- [[ "$help" = *"[-S tos]"* ]] &&
- _telnet_short=("$_telnet_short[@]" '-S+:IP type-of-service:')
- [[ "$help" = *"[-X atype]"* ]] &&
- _telnet_short=("$_telnet_short[@]" '-X+:authentication type to disable:')
- [[ "$help" = *"[-a]"* ]] &&
- _telnet_short=("$_telnet_short[@]" '-a[attempt automatic login]')
- [[ "$help" = *"[-c]"* ]] &&
- _telnet_short=("$_telnet_short[@]" '-c[disable .telnetrc]')
- [[ "$help" = *"[-d]"* ]] &&
- _telnet_short=("$_telnet_short[@]" '-d[debug mode]')
- [[ "$help" = *"[-e char]"* ]] &&
- _telnet_short=("$_telnet_short[@]" '-e+[specify escape character]:escape character:')
- [[ "$help" = *"[-f/-F]"* ]] &&
- _telnet_short=("$_telnet_short[@]" '-f' '-F')
- [[ "$help" = *"[-k realm]"* ]] &&
- _telnet_short=("$_telnet_short[@]" '-k+:realm:')
- [[ "$help" = *"[-l user]"* ]] &&
- _telnet_short=("$_telnet_short[@]" '-l+[specify user]:user:->users')
- [[ "$help" = *"[-n tracefile]"* ]] &&
- _telnet_short=("$_telnet_short[@]" '-n+[specify tracefile]:tracefile:_files')
- [[ "$help" = *"[-r]"* ]] &&
- _telnet_short=("$_telnet_short[@]" '-r[rlogin like user interface]')
- [[ "$help" = *"[-s src_addr]"* ]] &&
- _telnet_short=("$_telnet_short[@]" '-s+[set source IP address]:src_addr:')
- [[ "$help" = *"[-x]"* ]] &&
- _telnet_short=("$_telnet_short[@]" '-x')
- [[ "$help" = *"[-t transcom]"* ]] &&
- _telnet_short=("$_telnet_short[@]" '-t+:transcom:')
+ for k in ${(k)optionmap}
+ do
+ [[ "$help" = *"$k"* ]] &&
+ _telnet_short=( "$_telnet_short[@]" "$optionmap[$k]" )
+ done
# _arguments cannot handle following three options.
+ optionmap=( "[-noasynch]" '-noasynch' \
+ "[-noasyncnet]" '-noasyncnet' \
+ "[-noasynctty]" '-noasynctty' )
+
_telnet_long=()
- [[ "$help" = *"[-noasynch]"* ]] &&
- _telnet_long=("$_telnet_long[@]" '-noasynch')
- [[ "$help" = *"[-noasyncnet]"* ]] &&
- _telnet_long=("$_telnet_long[@]" '-noasyncnet')
- [[ "$help" = *"[-noasynctty]"* ]] &&
- _telnet_long=("$_telnet_long[@]" '-noasynctty')
+ for k in ${(k)optionmap}
+ do
+ [[ "$help" = *"$k"* ]] &&
+ _telnet_long=( "$_telnet_long[@]" "$optionmap[$k]" )
+ done
fi
[[ $#_telnet_long != 0 && (
--
Bart Schaefer Brass Lantern Enterprises
http://www.well.com/user/barts http://www.brasslantern.com
Messages sorted by:
Reverse Date,
Date,
Thread,
Author