Zsh Mailing List Archive
Messages sorted by:
Reverse Date,
Date,
Thread,
Author
Re: PATCH: _quilt: add full support
On Wed, Sep 21, 2011 at 12:17:38AM +0200, Luka Perkov wrote:
> Add completition support for each quilt command and option.
Fix small typo at 'snapshot'; use this patch.
Signed-off-by: Luka Perkov < lists ->-to->- lukaperkov.net >
---
diff --git a/Completion/Unix/Command/_quilt b/Completion/Unix/Command/_quilt
index 0c51ba5..130f381 100644
--- a/Completion/Unix/Command/_quilt
+++ b/Completion/Unix/Command/_quilt
@@ -3,46 +3,238 @@
local -a tmp
local rc
+_quilt_applied () {
+ tmp=( ${(f)"$(quilt applied 2>&1)"} )
+ rc=$?
+ if (( rc == 0 )); then
+ _wanted -V 'applied patches' expl 'patch' compadd "${tmp[@]}"
+ else
+ _message "No applied patches"
+ fi
+}
+
+_quilt_series () {
+ _wanted -V 'patches' expl 'patch' compadd ${(f)"$(quilt series)"}
+}
+
+_quilt_unapplied () {
+ tmp=( ${(f)"$(quilt unapplied 2>&1)"} )
+ rc=$?
+ if (( rc == 0 )); then
+ _wanted -V 'unapplied patches' expl 'patch' compadd "${tmp[@]}"
+ else
+ _message "No unapplied patches"
+ fi
+}
+
_arguments \
- '--trace' \
- '--quiltrc:config file:_files' \
- '--version' \
- ':quilt command:(add files import previous setup annotate fold mail push
- snapshot applied fork new refresh top delete graph next remove unapplied
- diff grep patches rename upgrade edit header pop series)' \
+ '--trace[Runs the command in bash trace mode]' \
+ '--quiltrc[Use the specified configuration file]:files:_files' \
+ '--version[Print the version number and exit]' \
+ ':quilt command:(add annotate applied delete diff edit files fold fork graph
+ grep header import mail new next patches pop previous push refresh rename
+ revert series setup shell snapshot top unapplied upgrade)' \
'*::subcmd:->subcmd' && return 0
-case "$state" in
- (subcmd)
-
+case "$state" in (subcmd)
case "$words[1]" in
- (applied|delete|files|graph|header|next|previous|refresh|unapplied)
- _wanted -V 'patches' expl 'patch' compadd ${(f)"$(quilt series)"}
+ (add)
+ _arguments '-h' \
+ '-P[Patch to add files to]:quilt series:_quilt_series' \
+ '*:files:_files'
;;
- (push)
- if (( CURRENT == 2 )); then
- tmp=( ${(f)"$(quilt unapplied 2>&1)"} )
- rc=$?
- if (( rc == 0 )); then
- _wanted -V 'unapplied patches' expl 'patch' compadd "${tmp[@]}"
- else
- _message "No unapplied patches"
- fi
- fi
+ (annotate)
+ _arguments '-h' \
+ '-P[Stop checking for changes at the specified rather than the topmost patch]:quilt series:_quilt_series' \
+ ':files:_files'
+ ;;
+ (applied)
+ _arguments '-h' \
+ ':quilt series:_quilt_series'
+ ;;
+ (delete)
+ _arguments '-h' \
+ '-n[Delete the next patch after topmost]' \
+ '-r[Remove the deleted patch file from the patches directory as well]' \
+ '--backup[Rename the patch file to patch~ rather than deleting it]' \
+ ':quilt series:_quilt_series'
+ ;;
+ (diff)
+ _arguments '-h' \
+ '-p[Select a patch style]:quilt patch style:(0 1 ab)' \
+ '-u[Create a unified diff]' \
+ '-U[Create a unified diff with num lines of context]:quilt unified diff: ' \
+ '-c[Create a context diff]' \
+ '-C[Create a context diff with num lines of context]:quilt context diff: ' \
+ '--no-timestamps[Do not include file timestamps in patch headers]' \
+ '--no-index[Do not output Index: lines]' \
+ '-z[Write to standard output the changes that have been made relative to the topmost or specified patch]' \
+ '-R[Create a reverse diff]' \
+ '-P[Create a diff for the specified patch]:quilt series:_quilt_series' \
+ '--combine[Create a combined diff for all patches between this patch and the patch specified with -P]:quilt series:_quilt_series' \
+ '--snapshot[Diff against snapshot]' \
+ '--diff=[Use the specified utility for generating the diff]:quilt select diff utility:_command_names -e' \
+ '--color=[Use syntax coloring]:quilt select color:(always auto never)' \
+ '--sort[Sort files by their name]' \
+ '*:files:_files'
+ ;;
+ (edit)
+ _arguments '-h' \
+ '*:files:_files'
+ ;;
+ (files)
+ _arguments '-h' \
+ '-a[List all files in all applied patches]' \
+ '-l[Add patch name to output]' \
+ '-v[Verbose, more user friendly output]' \
+ '--combine[Create a listing for all patches between this patch and the topmost or specified patch]:quilt series:_quilt_series' \
+ ':quilt series:_quilt_series'
+ ;;
+ (fold)
+ _arguments '-h' \
+ '-R[Apply patch in reverse]' \
+ '-q[Quiet operation]' \
+ '-f[Force apply]' \
+ '-p[The number of pathname components to strip]:quilt select strip-level: '
+ ;;
+ (fork)
+ _arguments '-h'
+ ;;
+ (graph)
+ _arguments '-h' \
+ '--all[Generate a graph including all applied patches and their dependencies]' \
+ '--reduce[Eliminate transitive edges from the graph]' \
+ '--lines[Compute dependencies by looking at the lines the patches modify]:quilt select lines: ' \
+ '--edge-labels=files[Label graph edges with the file names that the adjacent patches modify]' \
+ '-T ps[Directly produce a PostScript output file]' \
+ ':quilt series:_quilt_series'
+ ;;
+ (header)
+ _arguments '-h' \
+ '-a[Append the exiting patch header]' \
+ '-r[Replace the exiting patch header]' \
+ '-e[Edit the header in $EDITOR]' \
+ '--strip-diffstat[Strip diffstat output from the header]' \
+ '--strip-trailing-whitespace[Strip trailing whitespace at the end of lines of the header]' \
+ '--backup[Create a backup copy of the old version of a patch as patch~]' \
+ ':quilt series:_quilt_series'
+ ;;
+ (import)
+ _arguments '-h' \
+ '-p[Number of directory levels to strip when applying]:quilt select strip-level: ' \
+ '-R[Apply patch in reverse]' \
+ '-P[Patch filename to use inside quilt]:quilt select patch filename: ' \
+ '-f[Overwrite/update existing patches]' \
+ '-d[When overwriting in existing patch, keep the old (o), all (a), or new (n) patch header]:quilt select patch:(a n o)' \
+ '*:files:_files'
+ ;;
+ (mail)
+ _arguments '-h' \
+ '-m[Text to use as the text in the introduction]:quilt select text: ' \
+ '--prefix[Use an alternate prefix in the bracketed part of the subjects generated]:quilt select prefix: ' \
+ '--mbox[Store all messages in the specified file in mbox format]:files:_files' \
+ '--send[Send the messages directly]' \
+ '--sender[The envelope sender address to use]:quilt select sender: ' \
+ '--from[From header]:quilt select from: ' \
+ '--subject[Subject header]:quilt select subject: ' \
+ '--to[Append a recipient to the To header]:quilt select to: ' \
+ '--cc[Append a recipient to the Cc header]:quilt select cc: ' \
+ '--bcc[Append a recipient to the Bcc header]:quilt select bcc: ' \
+ '--signature[Append the specified signature to messages]:files:_files' \
+ '--reply-to[Add the appropriate headers to reply to the specified message]:quilt select reply-to: ' \
+ '*:quilt series:_quilt_series'
+ ;;
+ (new)
+ _arguments '-h'
+ ;;
+ (next)
+ _arguments '-h' \
+ ':quilt series:_quilt_series'
+ ;;
+ (patches)
+ _arguments '-h' \
+ '-v[Verbose, more user friendly output]' \
+ ':files:_files'
;;
(pop)
- if (( CURRENT == 2 )); then
- tmp=( ${(f)"$(quilt applied 2>&1)"} )
- rc=$?
- if (( rc == 0 )); then
- _wanted -V 'applied patches' expl 'patch' compadd "${tmp[@]}"
- else
- _message "No applied patches"
- fi
- fi
+ _arguments '-h' \
+ '-a[Remove all applied patches]' \
+ '-f[Force remove]' \
+ '-R[Always verify if the patch removes cleanly]' \
+ '-q[Quiet operation]' \
+ '-v[Verbose operation]' \
+ ':quilt applied:_quilt_applied'
+ ;;
+ (previous)
+ _arguments '-h' \
+ ':quilt series:_quilt_series'
+ ;;
+ (push)
+ _arguments '-h' \
+ '-a[Apply all patches in the series file]' \
+ '-q[Quiet operation]' \
+ '-f[Force apply, even if the patch has rejects]' \
+ '-v[Verbose operation]' \
+ '--leave-rejects[Leave around the reject files patch produced]' \
+ '--color=[Use syntax coloring]:quilt select color:(always auto never)' \
+ ':quilt unapplied:_quilt_unapplied'
+ ;;
+ (refresh)
+ _arguments '-h' \
+ '-p[Select a patch style]:quilt patch style:(0 1 ab)' \
+ '-u[Create a unified diff]' \
+ '-U[Create a unified diff with num lines of context]:quilt unified diff: ' \
+ '-c[Create a context diff]' \
+ '-C[Create a context diff with num lines of context]:quilt context diff: ' \
+ '-z[Create a new patch containing the changes instead of refreshing the topmost patch]:quilt select new patch name: ' \
+ '--no-timestamps[Do not include file timestamps in patch headers]' \
+ '--no-index[Do not output Index: lines]' \
+ '--diffstat[Add a diffstat section to the patch header, or replace the existing diffstat section]' \
+ '-f[Enforce refreshing of a patch that is not on top]' \
+ '--backup[Create a backup copy of the old version of a patch as patch~]' \
+ '--sort[Sort files by their name instead of preserving the original order]' \
+ '--strip-trailing-whitespace[Strip trailing whitespace at the end of lines]' \
+ ':quilt series:_quilt_series'
+ ;;
+ (rename)
+ _arguments '-h' \
+ '-P[Patch to rename]:quilt series:_quilt_series'
+ ;;
+ (revert)
+ _arguments '-h' \
+ '-P[Revert changes in the named patch]:quilt series:_quilt_series' \
+ '*:files:_files'
+ ;;
+ (series)
+ _arguments '-h' \
+ '-v[Verbose, more user friendly output]'
+ ;;
+ (setup)
+ _arguments '-h' \
+ '-d[Optional path prefix for the resulting source tree]:quilt select path-prefix: ' \
+ '--sourcedir[Directory that contains the package sources]:quilt select package sources directory: ' \
+ '-v[Verbose debug output]' \
+ ':files:_files'
+ ;;
+ (shell)
+ _arguments '-h' \
+ ':quilt select shell command:_command_names -e'
+ ;;
+ (snapshot)
+ _arguments '-h' \
+ '-d[Remove current snapshot]'
+ ;;
+ (top)
+ _arguments '-h'
+ ;;
+ (unapplied)
+ _arguments '-h' \
+ ':quilt series:_quilt_series'
+ ;;
+ (upgrade)
+ _arguments '-h'
;;
(*)
- _files
;;
esac
;;
Messages sorted by:
Reverse Date,
Date,
Thread,
Author