PATCH: update util-linux completions to 2.31

[Oliver Kiddle <okiddle@xxxxxxxxxxx>]

A few commands gained extra options in util-linux 2.31.

Linux's last has changed a bit. It was previously part of sysvinit-utils
and another GNU psacct implementation is also around. I think the
util-linux implementation is the only one we need to care about going
forward but let me know if not.

There's also a new completion for hexdump which was a BSD thing. It
looks like for util-linux, they've perhaps taken the BSD code and not
changed much besides adding long options.

Oliver

diff --git a/Completion/Linux/Command/_losetup b/Completion/Linux/Command/_losetup
index 05ef7c56c..9cfaaf5bf 100644
--- a/Completion/Linux/Command/_losetup
+++ b/Completion/Linux/Command/_losetup
@@ -18,7 +18,7 @@ _arguments -s -S \
   - 'info' \
   '(-v --verbose)'{-v,--verbose}'[verbose mode]' \
   '(-o --offset -a --all)'{-a,--all}'[show the status of all loop devices]' \
-  '(-O --output)'{-O+,--output=}'[specify columns to be printed with --list]:column:_sequence -s , compadd - name autoclear back-file back-ino back-maj\:min maj\:min offset partscan ro sizelimit dio' \
+  '(-O --output)'{-O+,--output=}'[specify columns to be printed with --list]:column:_sequence -s , compadd - name autoclear back-file back-ino back-maj\:min maj\:min offset partscan ro sizelimit dio log-sec' \
   '(-J --json --raw -O --output -n --noheadings)'{-J,--json}'[use JSON --list output format]' \
   '(-l --list)'{-l,--list}'[list currently used loop devices]' \
   '(-J --json)--raw[raw output format]' \
@@ -36,6 +36,7 @@ _arguments -s -S \
   '(-L --nooverlap)'{-L,--nooverlap}'[avoid possible conflict between devices]' \
   '(-P --partscan)'{-P,--partscan}'[scan the partition table of newly created loop devices]' \
   '--sizelimit[limit device to specified size]:size (bytes)' \
+  '(-b --sector-size)'{-b+,--sector-size=}'[set logical sector size of loop device]:size (bytes)' \
   '--show[print device name after setup]' \
   '(-r --read-only)'{-r,--read-only}'[set up a read-only loop device]' \
   '1:file:_files' \
diff --git a/Completion/Linux/Command/_lsblk b/Completion/Linux/Command/_lsblk
index c8fbb27c7..f37305445 100644
--- a/Completion/Linux/Command/_lsblk
+++ b/Completion/Linux/Command/_lsblk
@@ -29,6 +29,7 @@ _arguments -C -s -S \
   '(H)'{-i,--ascii}'[output ascii characters only]' \
   '(H)'{-J,--json}'[use JSON output format]' \
   '(H)'{-l,--list}'[use list format output]' \
+  '(H)'{-t,--tree}'[use tree format output]' \
   '(H)'{-P,--pairs}'[use key="value" output format]' \
   '(H)'{-r,--raw}'[use raw output format]' \
   + 'H' \
diff --git a/Completion/Linux/Command/_wipefs b/Completion/Linux/Command/_wipefs
index 6e8507978..5142def8a 100644
--- a/Completion/Linux/Command/_wipefs
+++ b/Completion/Linux/Command/_wipefs
@@ -4,9 +4,19 @@ _arguments -s -S \
   '(H -a --all)'{-a,--all}'[wipe all magic strings]' \
   '(H -b --backup)'{-b,--backup}'[create a signature backup in $HOME]' \
   '(H -f --force)'{-f,--force}'[force erasure]' \
+  '(H -i --no-headings -J --json -p --parsable)'{-i,--no-headings}"[don't print headings]" \
+  '(H -J --json -i --no-headings -p --parsable)'{-J,--json}'[use JSON output format]' \
   '(H -n --no-act)'{-n,--no-act}'[do everything except the actual write() call]' \
   '(H -o --offset)'{-o+,--offset=}'[specify offset to erase]:offset (bytes)' \
-  '(H -p --parsable)'{-p,--parsable}'[print out in parsable instead of printable format]' \
+  '(H -O --output)'{-O+,--output=}'[specify columns to display]: : _values -s, "column"
+    "uuid[partition/filesystem UUID]"
+    "label[filesystem label]"
+    "length[magic string length]"
+    "type[superblock type]"
+    "offset[magic string offset]"
+    "usage[type description]"
+    "device[block device name]"' \
+  '(H -p --parsable -i --no-headings -J --json)'{-p,--parsable}'[print out in parsable instead of printable format]' \
   '(H -q --quiet)'{-q,--quiet}'[suppress output messages]' \
   '(H -t --types)'{-t+,--types=}'[limit the set of filesystem, RAIDs or partition tables]:type:_file_systems' \
   '(H)*:disk device:_files -g "*(-%)" -P / -W /' \
diff --git a/Completion/Unix/Command/_hexdump b/Completion/Unix/Command/_hexdump
index e69de29bb..f700ca683 100644
--- a/Completion/Unix/Command/_hexdump
+++ b/Completion/Unix/Command/_hexdump
@@ -0,0 +1,35 @@
+#compdef hexdump hd
+
+local -a args fmts optpar
+fmts=(
+ {--one-byte-octal,-b}'[one-byte octal display]'
+ {--one-byte-char,-c}'[one-byte character display]'
+ {--two-bytes-decimal,-d}'[two-byte decimal display]'
+ {--two-bytes-octal,-o}'[two-byte octal display]'
+ {--two-bytes-hex,-x}'[two-byte hexadecimal display]'
+ {--format=,-e+}'[specify format string to be used for displaying data]:format'
+ {--format-file=,-f+}'[specify file that contains format strings]:file:_files'
+)
+args=(
+ '(H -n --length)'{--length=,-n+}'[interpret only specified amount of input]:length (bytes)'
+ '(H -s --skip)'{--skip=,-s+}'[skip specified bytes at the beginning]:offset (bytes)'
+ '(H -v --no-squeezing)'{--no-squeezing,-v}'[output identical lines]'
+)
+
+[[ $service = hexdump ]] && fmts+=( {--canonical,-C}'[canonical hex+ASCII display]' )
+
+if [[ $OSTYPE = linux* ]]; then
+  args+=(
+    '(-L --color)'{-L+,--color=}'[interpret color formatting specifiers colors are enabled by default]:mode'
+    + H
+    '(- *)'{-h,--help}'[display usage information]'
+    '(- *)'{-V,--version}'[display version information]'
+  )
+else
+  # strip long options by taking every second element
+  print -v fmts -f '%2$s' -- "$fmts[@]"
+  print -v args -f '%2$s' -- "$args[@]"
+  optpar=( -A "-*" )
+fi
+
+_arguments -s -S $optpar '*:file:_files' $args + '(formats)' '(H)'$^fmts
diff --git a/Completion/Unix/Command/_last b/Completion/Unix/Command/_last
index f198e0fff..2013cc1c2 100644
--- a/Completion/Unix/Command/_last
+++ b/Completion/Unix/Command/_last
@@ -4,19 +4,20 @@ local pattern arg args ttys
 ttys=( /dev/tty*(N) /dev/pts/*(N) reboot )
 ttys=( ${ttys#/dev/} )
 
+[[ $OSTYPE = linux-gnu ]] || args=( -A "-*" )
 for pattern arg in \
-  '(solaris*|linux-gnu)' '-a[display hostname in last column]' \
-  '((free|net|open)bsd*|darwin*|dragonfly*|linux-gnu)' '-h[limit sessions by hostname]:host:_hosts' \
-  '((free|open)bsd*|linux-gnu)' '-s[report duration in seconds]' \
-  '(freebsd*|openbsd*)' '-d[limit sessions to those active at snapshot time]:time ([[CC]YY][MMDD]hhmm[.SS])' \
-  '((net|free|open)bsd*|darwin*|dragonfly*)' '-t[limit sessions by tty]:tty:_ttys -D' \
+  '(solaris*|linux-gnu)' '(--hostlast)-a[display hostname in last column]' \
+  '((free|net|open)bsd*|darwin*|dragonfly*)' '-h+[limit sessions by hostname]:host:_hosts' \
+  '((free|open)bsd*)' '-s[report duration in seconds]' \
+  '(freebsd*|openbsd*)' '-d+[limit sessions to those active at snapshot time]:time ([[CC]YY][MMDD]hhmm[.SS])' \
+  '((net|free|open)bsd*|darwin*|dragonfly*)' '-t+[limit sessions by tty]:tty:_ttys -D' \
   'openbsd*' '-c[calculate total time]' \
-  '^darwin*' '-f[specify account file]:file:_files' \
-  '(solaris*|linux-gnu|freebsd*|openbsd*)' '-n[specify number of lines to show]:number' \
+  '^darwin*' '(--file)-f+[specify account file]:file:_files' \
+  '(solaris*|linux-gnu|freebsd*|openbsd*)' '(--limit)-n+[specify number of lines to show]:number' \
   '((open|net)bsd*|dragonfly*)' '-T[show more detailed time information including year and seconds]' \
   'netbsd*' '-x[assume file is in wtmpx(5) format]' \
   'netbsd*' '-n[show IP of remote hosts]' \
-  'freebsd*' '-w[show seconds in durarion field]' \
+  'freebsd*' '-w[show seconds in duration field]' \
   'freebsd*' '-y[show year in session start time]'
 do
   [[ $OSTYPE = $~pattern ]] && args+=( $arg )
@@ -32,14 +33,21 @@ case $OSTYPE in
   ;;
   linux-gnu)
     args+=(
-      '-R[suppress display of hostname field]'
-      '-d[translate IP to hostname]'
-      '-F[show full login and logout times and dates]'
-      '-i[show IP of remote hosts]'
-      '-o[read old-format wtmp]'
-      '-t[limit sessions to those active at snapshot time]:time (YYYYMMDDhhmmss)'
-      '-w[show full user and domain names]'
-      '-x[display shutdown/runlevel entries]'
+      '(-a)--hostlast[display hostname in last column]'
+      '(-d --dns -i --ip)'{-d,--dns}'[translate IP to hostname]'
+      '(-f)--file=[specify account file]:file:_files'
+      '(-F --fulltimes)'{-F,--fulltimes}'[show full login and logout times and dates]'
+      '(-i --ip -d --dns)'{-i,--ip}'[show IP of remote hosts]'
+      '(-n)--limit=[specify number of lines to show]:number'
+      '(-R --nohostname)'{-R,--nohostname}'[suppress display of hostname field]'
+      '(-s --since)'{-s+,--since=}'[display lines since the specified time]:time (YYYYMMDDhhmmss)'
+      '(-t --until)'{-t+,--until=}'[display lines until the specified time]:time (YYYYMMDDhhmmss)'
+      '(-p --present)'{-p+,--present=}'[display who were present at the specified time]:time (YYYYMMDDhhmmss)'
+      '(-w --fullnames)'{-w,--fullnames}'[show full user and domain names]'
+      '(-x --system)'{-x,--system}'[display shutdown/runlevel entries]'
+      '--time-format=[show timestamps in the specified format]:format:(notime short full iso)'
+      '(- *)'{-h,--help}'[display usage information]'
+      '(- *)'{-V,--version}'[display version information]'
     )
   ;;
 esac
@@ -50,4 +58,4 @@ else
   args+=( '*:user:_users' )
 fi
 
-_arguments -s $args
+_arguments -s -S $args