Zsh Mailing List Archive
Messages sorted by:
Reverse Date,
Date,
Thread,
Author
Re: PATCH: support for italic and faint fonts from region_highlight
- X-seq: zsh-workers 51280
- From: Oliver Kiddle <opk@xxxxxxx>
- To: Zsh workers <zsh-workers@xxxxxxx>
- Subject: Re: PATCH: support for italic and faint fonts from region_highlight
- Date: Fri, 06 Jan 2023 23:03:21 +0100
- Archived-at: <https://zsh.org/workers/51280>
- In-reply-to: <36223-1672793943.791824@SLuG.9t5a.jH-P>
- List-id: <zsh-workers.zsh.org>
- References: <36223-1672793943.791824@SLuG.9t5a.jH-P>
It was brought to my attention that turning faint on does have a termcap
entry - mh or terminfo dim.
I've attached a replacement for this patch to use this which also adds
a function for combining two attribute sets allowing for priority over
colour and font weight to go to one of the sets. This will get even more
use in the next update for handling leftover attributes from the prompt.
Oliver
diff --git a/Doc/Zsh/zle.yo b/Doc/Zsh/zle.yo
index 58700072a..60254e828 100644
--- a/Doc/Zsh/zle.yo
+++ b/Doc/Zsh/zle.yo
@@ -2780,9 +2780,13 @@ This works similarly to the foreground colour, except the background is
not usually affected by the bold attribute.
)
item(tt(bold))(
-The characters in the given context are shown in a bold font.
+The characters in the given context are shown with a bold font weight.
Not all terminals distinguish bold fonts.
)
+item(tt(faint))(
+The characters in the given context are shown with a faint font weight.
+Not all terminals distinguish faint fonts.
+)
item(tt(standout))(
The characters in the given context are shown in the terminal's standout
mode. The actual effect is specific to the terminal; on many terminals it
@@ -2796,6 +2800,10 @@ The characters in the given context are shown underlined. Some
terminals show the foreground in a different colour instead; in this
case whitespace will not be highlighted.
)
+item(tt(italic))(
+The characters in the given context are shown in a italic font.
+Not all terminals support italic fonts.
+)
enditem()
The characters described above as `special' are as follows. The
diff --git a/Src/Zle/zle_refresh.c b/Src/Zle/zle_refresh.c
index d56478147..6cbfe9072 100644
--- a/Src/Zle/zle_refresh.c
+++ b/Src/Zle/zle_refresh.c
@@ -1193,23 +1193,10 @@ zrefresh(void)
offset = predisplaylen; /* increment over it */
if (rhp->start + offset <= tmppos &&
tmppos < rhp->end + offset) {
- if (rhp->atr & (TXTFGCOLOUR|TXTBGCOLOUR)) {
- /* override colour with later entry */
- base_attr = rhp->atr;
- } else {
- /* no colour set yet */
- base_attr |= rhp->atr;
- }
+ base_attr = mixattrs(rhp->atr, base_attr);
}
}
- if (special_attr & (TXTFGCOLOUR|TXTBGCOLOUR)) {
- /* keep colours from special attributes */
- all_attr = special_attr |
- (base_attr & ~TXT_ATTR_COLOUR_MASK);
- } else {
- /* keep colours from standard attributes */
- all_attr = special_attr | base_attr;
- }
+ all_attr = mixattrs(special_attr, base_attr);
if (t == scs) /* if cursor is here, remember it */
rpms.nvcs = rpms.s - nbuf[rpms.nvln = rpms.ln];
@@ -2441,14 +2428,7 @@ singlerefresh(ZLE_STRING_T tmpline, int tmpll, int tmpcs)
}
}
}
- if (special_attr & (TXTFGCOLOUR|TXTBGCOLOUR)) {
- /* keep colours from special attributes */
- all_attr = special_attr |
- (base_attr & ~TXT_ATTR_COLOUR_MASK);
- } else {
- /* keep colours from standard attributes */
- all_attr = special_attr | base_attr;
- }
+ all_attr = mixattrs(special_attr, base_attr);
if (tmpline[t0] == ZWC('\t')) {
for (*vp++ = zr_sp; (vp - vbuf) & 7; )
diff --git a/Src/init.c b/Src/init.c
index 75ef2e094..68621a0ad 100644
--- a/Src/init.c
+++ b/Src/init.c
@@ -747,7 +747,7 @@ init_shout(void)
static char *tccapnams[TC_COUNT] = {
"cl", "le", "LE", "nd", "RI", "up", "UP", "do",
"DO", "dc", "DC", "ic", "IC", "cd", "ce", "al", "dl", "ta",
- "md", "so", "us", "me", "se", "ue", "ch",
+ "md", "mh", "so", "us", "ZH", "me", "se", "ue", "ZR", "ch",
"ku", "kd", "kl", "kr", "sc", "rc", "bc", "AF", "AB"
};
@@ -872,6 +872,23 @@ init_term(void)
/* The following is an attempt at a heuristic,
* but it fails in some cases */
/* rprompt_indent = ((hasam && !hasbw) || hasye || !tccan(TCLEFT)); */
+
+ /* if there's no termcap entry for italics, use CSI 3 m */
+ if (!tccan(TCITALICSBEG)) {
+ zsfree(tcstr[TCITALICSBEG]);
+ tcstr[TCITALICSBEG] = ztrdup("\033[3m");
+ tclen[TCITALICSBEG] = 4;
+ }
+ if (!tccan(TCITALICSEND)) {
+ zsfree(tcstr[TCITALICSEND]);
+ tcstr[TCITALICSEND] = ztrdup("\033[23m");
+ tclen[TCITALICSEND] = 5;
+ }
+ if (!tccan(TCFAINTBEG)) {
+ zsfree(tcstr[TCFAINTBEG]);
+ tcstr[TCFAINTBEG] = ztrdup("\033[2m");
+ tclen[TCFAINTBEG] = 4;
+ }
}
return 1;
}
diff --git a/Src/prompt.c b/Src/prompt.c
index 880194f87..488a90d09 100644
--- a/Src/prompt.c
+++ b/Src/prompt.c
@@ -1590,7 +1590,15 @@ applytextattributes(int flags)
turnoff &= turnoff - 1;
}
- if (keepcount < turncount || (change & ~txtpendingattrs & TXTBOLDFACE)) {
+ /* enabling bold can be relied upon to disable faint
+ * (the converse not so as that commonly does nothing at all) */
+ if (txtcurrentattrs & TXTFAINT && txtpendingattrs & TXTBOLDFACE) {
+ --turncount;
+ change &= ~TXTFAINT;
+ }
+
+ if (keepcount < turncount ||
+ (change & ~txtpendingattrs & TXT_ATTR_FONT_WEIGHT)) {
tsetcap(TCALLATTRSOFF, flags);
/* this cleared all attributes, may need to restore some */
change = txtpendingattrs & TXT_ATTR_ALL & ~txtunknownattrs;
@@ -1607,13 +1615,19 @@ applytextattributes(int flags)
/* in some cases, that clears all attributes */
change = txtpendingattrs & TXT_ATTR_ALL & ~txtunknownattrs;
}
+ if (change & ~txtpendingattrs & TXTITALIC)
+ tsetcap(TCITALICSEND, flags);
}
if (change & txtpendingattrs & TXTBOLDFACE)
tsetcap(TCBOLDFACEBEG, flags);
+ if (change & txtpendingattrs & TXTFAINT)
+ tsetcap(TCFAINTBEG, flags);
if (change & txtpendingattrs & TXTSTANDOUT)
tsetcap(TCSTANDOUTBEG, flags);
if (change & txtpendingattrs & TXTUNDERLINE)
tsetcap(TCUNDERLINEBEG, flags);
+ if (change & txtpendingattrs & TXTITALIC)
+ tsetcap(TCITALICSBEG, flags);
if (change & TXT_ATTR_FG_MASK)
set_colour_attribute(txtpendingattrs, COL_SEQ_FG, flags);
@@ -1678,6 +1692,25 @@ tunsetattrs(zattr newattrs)
txtpendingattrs &= ~TXT_ATTR_BG_MASK;
}
+/* Merge two attribute sets. In an case where attributes might conflict
+ * choose those from the first parameter. Foreground and background
+ * colours are taken together - less likely to end up with unreadable
+ * combinations. */
+
+/**/
+mod_export zattr
+mixattrs(zattr primary, zattr secondary)
+{
+ zattr result = secondary;
+ /* take colours from primary */
+ if (primary & (TXTFGCOLOUR|TXTBGCOLOUR))
+ result &= ~TXT_ATTR_COLOUR_MASK;
+ /* take font weight from primary */
+ if (primary & TXT_ATTR_FONT_WEIGHT)
+ result &= ~TXT_ATTR_FONT_WEIGHT;
+ return result | primary;
+}
+
/*****************************************************************************
* Utilities dealing with colour and other forms of highlighting.
*
@@ -1700,9 +1733,11 @@ struct highlight {
static const struct highlight highlights[] = {
{ "none", 0, TXT_ATTR_ALL },
- { "bold", TXTBOLDFACE, 0 },
+ { "bold", TXTBOLDFACE, TXTFAINT },
+ { "faint", TXTFAINT, TXTBOLDFACE },
{ "standout", TXTSTANDOUT, 0 },
{ "underline", TXTUNDERLINE, 0 },
+ { "italic", TXTITALIC, 0 },
{ NULL, 0, 0 }
};
diff --git a/Src/zsh.h b/Src/zsh.h
index 35ae033e3..e834c7e06 100644
--- a/Src/zsh.h
+++ b/Src/zsh.h
@@ -2646,22 +2646,25 @@ struct ttyinfo {
#define TCDELLINE 16
#define TCNEXTTAB 17
#define TCBOLDFACEBEG 18
-#define TCSTANDOUTBEG 19
-#define TCUNDERLINEBEG 20
-#define TCALLATTRSOFF 21
-#define TCSTANDOUTEND 22
-#define TCUNDERLINEEND 23
-#define TCHORIZPOS 24
-#define TCUPCURSOR 25
-#define TCDOWNCURSOR 26
-#define TCLEFTCURSOR 27
-#define TCRIGHTCURSOR 28
-#define TCSAVECURSOR 29
-#define TCRESTRCURSOR 30
-#define TCBACKSPACE 31
-#define TCFGCOLOUR 32
-#define TCBGCOLOUR 33
-#define TC_COUNT 34
+#define TCFAINTBEG 19
+#define TCSTANDOUTBEG 20
+#define TCUNDERLINEBEG 21
+#define TCITALICSBEG 22
+#define TCALLATTRSOFF 23
+#define TCSTANDOUTEND 24
+#define TCUNDERLINEEND 25
+#define TCITALICSEND 27
+#define TCHORIZPOS 27
+#define TCUPCURSOR 28
+#define TCDOWNCURSOR 29
+#define TCLEFTCURSOR 30
+#define TCRIGHTCURSOR 31
+#define TCSAVECURSOR 32
+#define TCRESTRCURSOR 33
+#define TCBACKSPACE 34
+#define TCFGCOLOUR 35
+#define TCBGCOLOUR 36
+#define TC_COUNT 37
#define tccan(X) (tclen[X])
@@ -2676,12 +2679,14 @@ struct ttyinfo {
#endif
#define TXTBOLDFACE 0x0001
-#define TXTSTANDOUT 0x0002
-#define TXTUNDERLINE 0x0004
-#define TXTFGCOLOUR 0x0008
-#define TXTBGCOLOUR 0x0010
+#define TXTFAINT 0x0002
+#define TXTSTANDOUT 0x0004
+#define TXTUNDERLINE 0x0008
+#define TXTITALIC 0x0010
+#define TXTFGCOLOUR 0x0020
+#define TXTBGCOLOUR 0x0040
-#define TXT_ATTR_ALL 0x001F
+#define TXT_ATTR_ALL 0x007F
/*
* Indicates to zle_refresh.c that the character entry is an
@@ -2690,7 +2695,10 @@ struct ttyinfo {
#define TXT_MULTIWORD_MASK 0x0400
/* used when, e.g an invalid colour is specified */
-#define TXT_ERROR 0xF00000F000000800
+#define TXT_ERROR 0xF00000F000000003
+
+/* Mask for font weight */
+#define TXT_ATTR_FONT_WEIGHT (TXTBOLDFACE|TXTFAINT)
/* Mask for colour to use in foreground */
#define TXT_ATTR_FG_COL_MASK 0x000000FFFFFF0000
Messages sorted by:
Reverse Date,
Date,
Thread,
Author